Sitemap Find Us Profile Home

Ancillary Supplies -> Rock Oil Lubricants

Rock Oil Lubricants

Status Fluidpower stocks the full range of Rock Oil Lubricants - the complete range of hydraulic oils covering industrial, commercial, automotive and agricultural applications. Made from the finest virgin oils and treated with the most advanced additives Rock Oils have the following benefits: proven field performance, outstanding thermal and oxidative stability, superior hydraulic stability, good demulsibility, excellent rust protection, lower filter blockage tendency.


HLP Hydraulic Oils
Strata 15W40
Strata 10W40
FD5 Synthetic Gear Oil
Lithium EP2 Grease
Adhesive White Food Grease
Anti-Freeze


HLP HYDRAULIC OILS

They are applicable for all types of hydraulic systems operating under high pressure, and are suitable where low zinc concentrations are essential, for example where silver plated components are present.

All Rock Hydraulic Oils meet or exceed the following specifications:

  • Sperry Vickers I-286-S,M-2950-S
  • Denison HF-1, HF-2, HF-0
  • Cincinnati Milacron P-68, P-69, P-70
  • Lee Norse 100-1
  • Jeffery No. 87
  • Ford M-6C32
  • US Steel 127, 136
  • BF Goodrich 0152
  • GM LH-04-1, LH-04-1, LH-15-1
  • Also DIN 51524 pt.2 & DIN 51525

TYPICAL DATA

ISO Viscosity Grade (cSt)

 10 15 22 32 46 68 100 150 320
                   
@ 0°C     188 320 535 960
 1650    
@ 20°C     60 86.6 170
 196 325    
@ 40°C 9.72 15 22.8 31.7 46 68 100 150 320
@ 100°C 2.2 3.5 4.38 5.38 6.97 9.05 11.6    
Viscosity Index 74 96 100 108 108 102 104 100 98
Flash Point Closed °C 146 150 165 210 213 219 231 240 250
Pour Point -45 -20 -18 -10 -10 -10 -10 -10 -8
Neutralisation value mg KOH/g 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.70

 

STRATA 15w40 SUPERIOR DIESEL ENGINE OIL

 

STRATA 15w40 synthetic fortified diesel engine oil is a multi-grade lubricant produced from the finest base stocks available, blended with state-of-the-art synthetic additives to provide an ultra modern lubricant suitable for use in the latest generation of automotive diesel engines.

STRATA 15w40 synthetic fortified diesel engine oil is blended to exceed the requirements of the US Army specification MIL-L-2104 E and also meets or exceeds API CG4 and the European ACEA B4 specifications.

 
  Performance level

 

  • API CG-4 VW 505
  • ACEA A3, B3, E2
  • MB 228.2; 228.3
  • Volvo VDS MAN 270/1

STRATA 15w40 synthetic fortified diesel engine oil is suitable for use in the latest generation of turbo and non-turbo diesel engines.

 
  Typical Analysis
Kinematic Viscosity @ 40°C 110cSt
Kinematic Viscosity @ 100°C 14.5cSt
Viscosity Index 140
Specific Gravity 0.883g/ml
Flash Point (°C) >180

Calcium 		0.2625%wt
Zinc 0.11%wt
Phosphorus 0.1013%wt
Magnesium 0.019%wt

STRATA 10w40 Synthetic fortified Engine oil


Strata 10w/40 is a high performance technologically advanced lubricant formulated from a carefully balanced mixture of the finest mineral and synthetic base stocks fortified with the latest additive technology. The low viscosity, excellent thermal stability and superior resistance to oxidation offered by this selection makes Strata 10w/40 particularly suitable for compact, high power, high revving engines currently being developed.
 
BENEFITS

High temperature wear protection.
Easier starting over a wide temperature range.
Extreme shear stability.
Outstanding resistance to decomposition and deposit formation.
Synthetic content to reduce oil thickening due to evaporation.

 
SPECIFICATIONS

 

Strata 10w/40 meets or exceeds the following specifications: -

  • ACEA A3 B4 E2 E3
  • API SG; SJ /CG-4
  • MB 228.0, 228.1, 228.2, 228.3, 229.1
  • VW 505
  • Volvo VDS

 
TYPICAL DATA

 

Viscosity @ 100°C 14.5cSt
Viscosity @ 40°C 101cSt
Viscosity Index 155
Specific Gravity @ 15°C 0.88g/ml
Pour Point <-20°C

 
CHEMICAL ANALYSIS

 

Calcium 0.25%m/m
Magnesium 0.05%m/m
Zinc 0.13%m/m
Phosphorus 0.11%m/m
Sulphated ash 1.2%m/m
TBN (D2896) 11.0mg KOH/gm

FD 5 SYNTHETIC GEAR OIL


FD 5 gear oil is a 75w/90 fully synthetic Extreme Pressure (EP) transmission fluid, formulated from a complex combination of synthetic base stocks, to meet the performance demands of manual gearboxes under extreme operating conditions of both temperature and load. This unique synthetic composition demonstrates outstanding performance with excellent low temperature fluidity without affecting the severe operating capability at high temperature and speed.

FD 5 gear oil also has high performance antiwear and load carrying additive systems proven in the latest manual transmission systems.

FD 5 gear oil has been developed to give maximum lubrication under high temperature and high speed conditions whilst contending with the problem of low temperature gear shift difficulties thus reducing wear and preventing failure.
 
PERFORMANCE LEVEL

FD 5 gear oil meets or exceed the following specifications:
  • API GL 4
  • MIL-L-2105 C
  • OPEL BO 4O 1043
  • FORD(EUROPE) ESD-M2C-175A
TYPICAL DATA

AppearancePale Yellow Oily Liquid
Viscosity @ 40°C 98cSt
Viscosity @ 100°C 14.3cSt
Specific Gravity @ 15°C0.850g/ml
Sulphur0.9%wt/wt

 

LITHIUM EP 2 GREASE


A premium quality grease for use in all anti-friction and plain bearings subjected to high load conditions.
 
FEATURES

  • Good mechanical stability
  • Good oxidation stability
  • Good load carrying properties
  • Good resistance to shock loads
  • Good mechanical stability
  • Good oxidation stability
  • Good water resistance
  • Wide temperature range
  • Good resistance to oil separation
  • Good pumpability
  • Compatible with other lithium soap greases
  • Synthetic base giving additional thermal and oxidative stability
TYPICAL PHYSICAL CHARACTERISTICS

AppearanceMedium fibred grease
ColourBottle Green
Unworked penetration (IP50) 265-295
Worked penetration (IP50) 265-295
N.L.G.I. ClassificationNo 2
Dropping Point (IP1312) ºC 180 min
Operating temperature ºC-20 to +140
Free Acidity (as Oleic IP37) % 0.05
Free Alkalinity (as Hydroxide IP37) % 0.1
Oil Separation (IP121) % 5 max
Oxidation stability (IP142) 16 hrs @ 99ºC pressure drop in psi4
Copper corrosion (IP112)Negative
Aluminium corrosion (Mod IP112)Negative
Mild Steel corrosion (Mod IP112)Negative
Soap Content %10
Mineral Oil content %65
Ventmeter pressure @ 70ºF450psi
Water washout (ASTM D1264) %39ºC 3
Water washout (ASTM D1264) %79ºC 4
Timken OK Load Kg (lbs) 20(45)

 


Rock A.W.F.G. Adhesive White Food Grease

Rock Oil’s AWFG is specially formulated for use within the Food Industry. It is principally an aluminium complex soap grease prepared with USP White Oils.

It is specifically formulated for use in wet or humid conditions at ambient temperatures, it having high resistance to water wash-out. It is also, however, capable of operating over a wide temperature range of sub zero to +190ºC

Uses:
  • In wet, ambient humid conditions
  • Applications requiring very good mechanical shear resistance
  • High load and low speed bearings
  • Open gears
  • Oven chains
Typical properties:

 Unitmethod a.w.f.g.
Colour--White
Texture--Smooth2
NLGI GradeGradeNLGI2
Worked penetration – 60 strokes1/10 mmISO 2137273
Worked penetration – 100 strokes1/10 mmISO 2137 270
Drop Point ºCISO 2176271
Base stock viscosity @ 40ºCmm2/secISO 31041187
Base stock viscosity @ 100ºCmm2/secISO 310439

ANTIFREEZE

A high performance engine coolant which exceeds the requirements of the latest British Standard requirement BS 6580 (1992). It is a Mono ethylene Glycol based fluid containing a balanced mixture of the most effective corrosion inhibitors formulated to give outstanding corrosion protection whether the system is of predominantly aluminium or ferrous material. The performance requirements of BS 6580 are essentially the same as those of ASTM D4985 and ASTM D 5345 in terms of materials corrosion, making Rock Antifreeze eminently suitable for Heavy Duty engines such as off-road equipment used in Agriculture, Construction and Mining.

ROCK OIL’S ANTIFREEZE is an all year round treatment providing the best protection against winter freezing, overheating and corrosion in car, bus, truck or plant equipment.
When diluted with water frost protection will be provided as below:-

Dilution Rate (%vol in water) Temperature at which coolant remains pumpable.(°C)
25-14
33-17
50-36

 
PERFORMANCE LEVEL

British Standards specification BS 6580 1992


 
TYPICAL CHARACTERISTICS
ColourVisualBlue
Appearance @ 20°CVisualA mobile liquid free from sediment.
Density @ 20°C ASTM D12981.13G/ml
Boiling Point @ 760mm hg,ASTM D1120Above 170°C
pH UndilutedASTM D 12876.4
Water , % wt ASTM D 1123Less than 2.1


  General Email: info@statusfluidpower.com © Copyright 2005 Status Fluidpower Site by Day Webdevelopment
 Status Fluidpower Ltd | Services | Sitemap | Terms & Conditions